I built this smoother a while back. It has 3/16 brass sides and a 1 in beech sole. The bed angle is 25 degrees, and has a 1/8 blade with a 30 degree bevel.The front knob is wenge with a rosewood handle.The back handle is also rosewood.

I have just finished my second smoother using the same methods, but using a frog off an old stanley. This plane is bedded at 50 degrees.

Attached Images

	hand plane 1.jpg (26.1 KB, 439 views)
	hand plane 1 bottom.jpg (17.4 KB, 439 views)
	hand plane 2 side view.jpg (20.5 KB, 430 views)
	hand plane 2 bottom.jpg (16.3 KB, 426 views)
	hand plane 2 bed.jpg (25.2 KB, 424 views)

Very nice!! You know, it never occurred to me until just now seeing the sole of your plane - does the infill type plane tend to leave a mark on the surface of the wood being planed where the brass sides of the plane rub?

No Thjggy the brass sides do not leave and scratches or marks

Wally
When I try to see your brass plane,I just get multi colors and no picture. What can I do to see your plane? Mitch