Below are Grizzly, Delta,
and Jet bandsaws for sale. A bandsaw is a very useful machine to
have on hand in your shop. Used for
cutting curves and straight ripping to re-sawing boards into sheets
of veneer, the bandsaw can do it all. The size indicated is usually
the cutting capacity between the blade and the frame, for example,
a 14" Delta bandsaw will allow a cut roughly 14" between the blade
and frame. The cutting height is figured from the table surface
to the highest point your wood will pass under while in the cut.
This is where you need to think about if you will be doing any
re-sawing, the highest capacity height the better.
Bandsaws 9"-17" or 19"-26" and
Horizontal Re-saws | Delta
Bandsaws 9"-18" | Jet
Bandsaws 12" and 20"