Here are some Jet bandsaws for sale. They are listed in order of price, lowest to highest. The sizes are a 9" bench top model bandsaw to a 18" bandsaw. Be sure your shop has the proper electric wiring to accommodate the power supply needs of the bandsaw you choose. JET JWBS-12OS / 708901 12" Open Stand Band Saw This JET open stand band saw features a powerful, 1/2-horsepower, totally enclosed, fan-cooled motor, with an alloy V-belt drive system, to deliver maximum cutting performance. It features a full 6-inch under guide cutting capacity, with a 12-inch blade to frame capacity. The large 14-by-14-inch cast-iron table tilts 45 degrees to the right and 100 degrees to the left. The lower wheel brush keeps the wheels and blade free from dust, chips, and debris, which prolongs blade life and improves tracking. Durability is ensured by the solid cast-iron table and frame construction. The 2-1/2-inch dust port is built-in, with an additional 4-inch adapter. FEATURES * Powerful 1/2 HP, totally enclosed, fan cooled motor with alloy
V-belt drive system to deliver maximum cutting performance STANDARD EQUIPMENT * Steel open style stand SPECIFICATIONS JET 708115K / JWBS-14CS 14" Bandsaw with Enclosed Stand Giving you room to maneuver, no matter what the project, this 14-inch band saw has a capacity of 6 by 13-1/2 inches and is packed with well thought-out features: The table tilts 45 degrees to the right and 10 degrees to the left so that you can shift angles and directions easily; a V-groove blade guide ensures consistent and positive alignment, and the graphite-impregnated polymer JET blocks in the blade guides promise quicker setup and a cooler-running blade. The 1 hp, one-phase, 115/230-volt motor can get a 1/8-to-3/4-inch blade moving at 3,000 sfpm. The extra-large 15-by-15-inch cast-iron worktable offsets to provide you with a larger work area in front of the blade. Standard equipment includes the stand, 2-inch dust chute, and a 3/8-inch band saw blade. FEATURES * Features a rigid one-piece welded stand which requires no assembly STANDARD EQUIPMENT * Stand SPECIFICATIONS JET JWBS-14OS / 708113 14" Band Saw with Open Stand This 3/4 hp, single-phase motor powers a 1/8- to 3/4-inch blade at 3,000 sfpm giving you the power you need to complete your next project easily and quickly. Totally enclosed and fan-cooled for a long life, this model is completely prewired and features a quick-connect motor-to-swtich plug for easy setup. The upper blade guide makes microadjustments simple while the V-groove blade guide bar gives you consistent and positive alignment. There are graphite-impregnated polymer JET Blocks in the blade guides for quick setup and a cooler running blade, and the extra-large 15-by-15-inch cast-iron worktable offsets to provide more work area in front of the blade. Your band saw purchase includes stand, 2-inch dust chute, and 3/8-inch bandsaw blade. JET 710115K 14" Deluxe Woodworking Bandsaw JET has taken the very popular JWBS-14 bandsaw and made some upgrades on a great saw. Power for the saw is now supplied by a 1-1/4 hp motor that will keep the nine spoke cast wheels turning smothly throught the cut. A new quick release blade tension handle will make blade changing very fast. Other features are micro adjustable blade guides, 2-inch dust port and the new Poly V-belt drive. These new features plus the standard ones from before will certainly make this a must for any shop. Features: * Closed stand Jet 708749/JWBS-16 16" Bandsaw This 16-inch band saw brings the high quality of construction and design found in JET's 18- and 20-inch resawing band saws into the price range of smaller shops and serious home woodworkers. This saw's most prominent benefit is the one-piece, dual tapered column design that offers superior rigidity and strength, minimizes vibration, and keeps cuts clean, smooth, and accurate. The saw has a powerful, totally enclosed, fan-cooled, 1-1/2-horsepower motor with a blade speed of 3,000 sfpm. There's a nice large cast-iron worktable (17 by 17 inches) that tilts 45 degrees to the right and 10 degrees to the left. There's also a T-slot for a miter gauge, and while a rip fence doesn't come standard with this model, JET makes a good one that can be purchased separately and easily installed. We like the smooth precision afforded by the rack-and-pinion upper-blade guide adjustment and the generous 10-1/4-inch-maximum cutting height it can dial up. While we'd prefer the roller bearing guides found on JET's 18- and 20-inch models (that guide set can be purchased separately and added later), the block guides used on this saw do offer plenty of support and low friction, and help fit the saw into shops with a tighter budget. This tool's versatility just keeps on going, accommodating 123-inch blades from 1/8 to 1-1/2 inches wide for equally smooth curve cutting or resawing. For the price, you'd have a hard time fitting more saw than this in your shop without making a serious compromise in quality. FEATURES * Dual tapered column design for greater rigidity and strength SPECIFICATIONS Jet 708750B/JWBS-18 18" Woodworking Bandsaw with Bearing Guides This 18-inch band saw offers high-quality construction and big resawing capacity to serious woodworkers on a tight tool budget. This saw's most prominent benefit is the one-piece, dual tapered column design, which offers superior rigidity and strength, minimizing vibration and keeping cuts clean, smooth, and accurate. Woodworkers in the know will also appreciate the inclusion of roller bearings on both the upper and lower guides, with dual roller bearings on each side of the blade and a single bearing behind the blade for back support. The system greatly reduces the friction inherent in stationary and European guide systems while providing more support. The saw is powered by a totally enclosed, 1-1/2-horsepower, fan-cooled motor with a blade speed of 3,000 sfpm. There's a large cast-iron worktable (19 by 19 inches) that tilts 45 degrees to the right and 10 degrees to the left. This model also comes with a JET rip fence and a good miter gauge. The saw's maximum cutting height is 10-1/4 inches, and the upper blade guide uses a smooth and precise rack-and-pinion adjustment mechanism. This tool's versatility just keeps on going, accommodating 133-inch blades from 1/8 to 1-1/2 inches wide for equally smooth curve cutting or resawing. JET puts the finishing touches on the saw with two locking cabinet doors and the durable powder-coated finish found on all their shop tools. In all, we think serious woodworkers will really appreciate the high quality JET is able to deliver for such a low cost. FEATURES * Dual tapered column design for greater rigidity and strength SPECIFICATIONS Jet 708752/JWBS-20 20" Woodworking Bandsaw with Bearing Guides Weighing in at a rock-solid 500 pounds, this 20-inch band saw tops JET's line with high-quality construction and big resawing capacity without a huge price tag. This saw's most prominent benefit is the one-piece, dual tapered column design, which offers superior rigidity and strength, minimizing vibration and keeping cuts clean, smooth, and accurate. Woodworkers in the know will also appreciate the inclusion of roller bearings on both the upper and lower guides, with dual roller bearings on each side of the blade and a single bearing behind the blade for back support. The system greatly reduces the friction inherent in stationary and European guide systems while providing more support. The saw is powered by a single-phase, 2-horsepower, totally enclosed, fan-cooled motor and has a blade speed of 3,450 sfpm. There's a large cast-iron worktable (21 by 21 inches) that tilts 45 degrees to the right and 10 degrees to the left. This model also comes with a JET rip fence and a good miter gauge. The saw's maximum cutting height is 12-1/4 inches, and the upper blade guide uses a smooth and precise rack-and-pinion adjustment mechanism. This tool's versatility just keeps on going, accommodating 150-inch blades from 1/8 to 1-1/2 inches wide for equally smooth curve cutting or resawing. JET puts the finishing touches on the saw with two locking cabinet doors and the durable powder-coated finish found on all their shop tools. In all, we think serious woodworkers will really appreciate the high quality JET is able to deliver for such a low cost. FEATURES * Dual tapered column design for greater rigidity and strength SPECIFICATIONS |
| Site Map | ©2003,
2004 AllWoodWork.com all rights reserved. contact
us , privacy policy. Established Feb.
14, 2003
|