Here are the Grizzly dust collectors. These dust collectors will help keep your shop free of shavings, chips, and dust.  But they will only filter down to a certain size dust particle and the smaller particles will remain air born. The best way to help with this problem is locate your dust collector outside or in another well ventilated room separated from you and your shop. Or if your have to keep the dust collector in the same room as shop, you should look into buying an air scrubber to catch the majority of particles missed by your regular dust collector. 

Accessories for these dust collection systems can be found here at the dust collector accessories page. 

  Grizzly G8027 1 HP Dust Collector

A great little workhorse at an incredible price! This is a great machine for sanders, router tables, shapers and other work. It's also very portable, so you can take it to the job site where it can handle the big jobs a regular shop vacuum can't handle

Features:

* Air Suction Capacity: 500 CFM
* Bag size (diameter x depth): 14-1/2" x 23" (2)
* Height (With bags inflated): 63"
* Motor Size: 1 H.P., single phase
* Number of 4" Intake Holes: 1

   Grizzly G1163 1 HP Light-Duty Dust Collector

Features:

* Air Suction Capacity: 450 CFM
* Approx. Shipping Weight: 58 lbs.
* Impeller: Balanced Steel, Radial Fin
* Motor size: 1 H.P., single phase
* Powder coated paint

   Grizzly G1028Z 1-1/2 HP Dust Collector

Grizzly G1028Z: This large capacity dust collector runs at 110/220 volts giving you the flexibility to run in any shop situation. A real performer!

Features:

* 6" inlet "Y" with 2 - 4" openings
* Air Suction Capacity: 1300 CFM
* Motor Size: 1-1/2 H.P., single phase, 3450 R.P.M. 110V/220V
* Standard Bag Filtration: 30 Micron

  Shop Fox G9975 2 HP Dust Collector

A powerful new dust collector from Shop Fox! This unit features a 12" steel impeller and has a 2 HP motor that runs on 220V.

Features:

* Air Suction Capacity: 1550 CFM
* Bag Size (Dia. x depth): 19" x 33" (2)
* Has a 6" inlet with a removable "Y" fitting with two 4" openings
* Height (With bags inflated): 78"
* Motor Size: 2 H.P., prewired to 220V, single phase, 3450 RPM

    Grizzly G1029Z 2 HP Dust Collector w/2.5 Micron Bag

This is a top seller and for good reason. Grizzly has been selling this unit for years and it has proven itself in thousands of shops around the country. Grizzly has now added a 2.5 micron top bag as standard equipment to capture the fine dust particles that normally end up all over your shop. Other features include: 12" balanced steel impeller with radial fin; 5.4 cubic foot bag capacity; portable base dimensions of 21-1/4" x 33-1/2"; 19" x 33" (diameter x depth) bag size (x2); powder coated paint; 78" height with bags inflated; approximate shipping weight of 123 lbs.

Features:

* 6" inlet with removable "Y" fitting with two 4" openings
* Air suction capacity: 1550 CFM
* Motor: 2 HP, 220V, single-phase, 12AMP, 3450 RPM
* Standard bag filtration: 2.5 micron
* Static pressure: 11"

   Grizzly G0548 2 HP Canister Dust Collector

Want the ultimate dust collector in your shop? Then this powerful new dust collector is just what you need. Simply move the convenient top mounted lever back and forth to remove any dust caked onto the filter, and in seconds you are back to full performance capacity. The steel duct from the impeller to the filter improves performance and reliability and with just a glance you'll know when it's time to haul out the chips thanks to clear bottom bags. Extra bags ship with the machine and are available from us to really make cleaning easy. Other features include: 12" blower/impeller; 10" static pressure; 74dB sound rating; 19-5/8" x 23-5/8" canister filter (diameter x depth); 40-1/2" lower bag length; 5.4 cubic foot bag capacity; 31-1/2" length x 37-3/8" width x 71" height overall dimensions. With the canister filter, simply turn the handle on the top a half turn in either direction for cleaning the canister. The handle controls three cleaning flappers inside and shakes the dust from the filter letting the fine dust fall directly into the collection bag. The canister filter is made of spun bond polyester with 1 micron filter capacity. Clear plastic collection bag with Quick Clamp. Extra bottom bags included. Approximate shipping weight of 121 lbs.

Features:

* 6" inlet has removable heavy-duty steel "Y" fitting with three 4" inlets
* Air suction capacity: 1400 CFM
* Allows filtering of the air to 1 micron with minimal loss of performance
* Motor: 2 HP, 220V, single-phase
* Our canister filters have 6 times the filtering area of regular bags and have a built in cleaner

  Grizzly G1030 3 HP Dust Collector

Features:

* Approx. Shipping Weight: 170 lbs.
* Has a 6" inlet with a removable "Y" fitting with three 4" openings
* Impeller Type/Balanced Steel: 12" Radial Fin
* Motor size: 3 H.P., 220V, single phase, 3450 RPM

  Grizzly G0525 3 HP, 2 Stage Cyclone Dust Collector

This Two Stage Dust Collector separates heavy particles from the fine particles before they go through the impeller and drops them into your steel or plastic 55 gallon drum. A drum dolly is included for easy mobility. The fine particles are trapped by the filter bad and fall into the disposable plastic bag for easy clean-up. The three-port intake manifold handles multiple machines simultaneously, or it can be removed to connect the dust collector to a mainline duct.

Features:

* Approximate shipping weight: 228 lbs.
* Height with bag inflated: 120"
* Intake adapter hole size (1): 4" x 3 Hole
* Motor: TEFC capacitor-start induction, 3 HP, single-phase, 220V
* Suction capacity: 2100 CFM

  Grizzly G0562 3 HP Double Canister Dust Collector

Want the ultimate dust collector in your shop? Then this powerful new dust collector is just what you need. Simply move the convenient top mounted lever back and forth to remove any dust caked onto the filter, and in seconds you are back to full performance capacity. The steel duct from the impeller to the filter improves performance and reliability and with just a glance you'll know when it's time to haul out the chips thanks to clear bottom bags. Extra bags ship with the machine and are available from us to really make cleaning easy. Other features include: 12" blower/impeller; 11" static pressure; 87dB sound rating; 19-5/8" x 23-5/8" canister filter (x2 canisters), (diameter x depth); 40-1/2" lower bag length (x2 bags); 10.8 cubic foot bag capacity; 31-1/2" length x 37-3/8" width x 71" height overall dimensions. With the canister filter, simply turn the handle on the top a half turn in either direction for cleaning the canister. The handle controls three cleaning flappers inside and shakes the dust from the filter letting the fine dust fall directly into the collection bag. The canister filter is made of spun bond polyester with 1 micron filter capacity. Clear plastic collection bag with Quick Clamp. Extra bottom bags included. Approximate shipping weight of 190 lbs.

Features:

* 7" inlet has removable heavy-duty steel "Y" fitting with three 4" inlets
* Air suction capacity: 1900 CFM
* Allows filtering of the air to 1 micron with minimal loss of performance
* Motor: 3 HP, 220V, single-phase
* Our canister filters have 6 times the filtering area of regular bags and have a built in cleaner

  Grizzly G9958 4 HP Dust Collector

This is the perfect dust collector for shops that have long runs and multiple machines, yet don't have the height room to accommodate our 12 foot giant. A large 13" fan can handle four machines simultaneously for a total suction capacity of 3,560 CFM. Convenient caster base allows you to move this unit easily.

Features:

* Air suction capacity: 3560 CFM
* Impeller size and type: 13" balanced steel
* Intake port with manifold: 4 x 4"
* Motor size: 4 H.P. Single Phase, 220V
* Overall height: 102"

   Grizzly G5954 5 HP Industrial Dust Collector

From its gutsy 5 HP motor to its huge 13" impeller, this powerhouse will tackle any dust collection task you throw at it, day in and day out. This industrial Dust Collector will handle four simultaneously running industrial woodworking machines requiring up to 1205 CFM each. This is more than enough for most machines so there's plenty of capacity to spare for running a good sized duct system.

Features:

* Air Suction Capacity: 4820 CFM
* Four-4" inlet manifold
* Motor: 5 HP, TEFC, single-phase, 220V, 34 amps
* Overall dimensions: 51-3/8"W x 48"D x 136"T
* Upper bag filtration: 1 micron

  Grizzly G0508 10 HP Industrial Dust Collector

Controlling dust in a large shop can be a challenging task, but this new 10 HP dust collector will make it child's play. Features 6050 CFM air suction capacity, 14 3/4" static pressure rating, 0.3 micron bag filters and a five port intake manifold. Four heavy-duty plastic collection bags (with a total of 53 cubic feet of storage capacity) will easily allow you to collect from the biggest chip and dust producing machines all day long without emptying. Warning: Keep small animals clear of intake openings-this collector is extremely powerful!

Features:

* Air suction capacity: 6050 CFM
* Balanced steel impeller
* Formed steel base with six - 4" casters
* Intake manifold: Five - 4" ports
* Motor: 10 HP, 220V, 3-phase, 32 amp, 3450 RPM