Here are some Delta jointers for sale. They are listed in order of price, lowest to highest. The sizes are a 6" bench top model jointer to a 12" jointer. Be sure your shop has the proper electric wiring to accommodate the power supply needs of the jointer you choose. And remember you will always wish you had bought a bigger size jointer after you get using the one you bought. Delta JT160 Shopmaster 6" Bench Top Jointer Small shop? Limited budget? That doesn't mean you have to give up on owning a jointer. This Shopmaster model is perfect for either situation but still packs features for precision woodworking. Variable speed offers 6,000 to 11,000 rpm, adjustable at the touch of a dial; infeed and outfeed tables adjust smoothly and easily. Though the 30-inch bed is shorter than stationary models, you aren't losing anything in width, because the JT160's cutting capacity is a full 6-1/8 inches. The fence, shorter and lighter, of course, than stationary models, tilts 0 to 45 degrees outward for beveling and chamfering operations. Positive stops are at 45 and 90 degrees. One sure advantage over its big brothers: the JT160 weighs just 35 pounds. Its cutterhead uses two knives rather than three, and the knives level with an easy-to-adjust jackscrew. Rubber base pads keep this little fellow where you want him, and if you want a permanent home for it, a stand is available. Features: * 10-amp, 120-volt motor for smooth, powerful cutting action Delta JT360 Shopmaster 6" Stationary Jointer The first time you run a work piece through this jointer, you'll know the satisfaction that precision brings. You'll be surfacing pieces as wide as 6-1/8 inches with a maximum pass depth of 1/8 inch over a 2-1/2-inch, three-blade cutterhead. If you've used a benchtop jointer in the past, you'll love stepping up to the JT360, with its 46-inch bed and 4-7/8-inch fence that tilts to 45 degrees--in and out--for beveling and chamfering. Positive stops are at 45 and 90 degrees. The bed is cast iron, and the infeed and outfeed tables operate smoothly on the gibbed dovetail ways. What's nice about moving up to this model is its 1/2-inch rabbeting capacity, perfect for picture frame moldings and lots of other projects. We're even impressed with the stand's solid, wide footprint and comfortable 33-inch height. Features: * Heavy duty 3/4-horsepower, 115/23-Volt, single-phase induction-type
motor Delta 37-195 6" Professional Jointer For those
seeking a midsize jointer for the long haul, this 6-inch model
is a great find suitable for the professional workplace or serious
home woodshop. Powered by Delta's trusted 1-horsepower
induction motor, the three-blade drum
spins quietly in its cast-iron bed.
Adjusting with Delta 37-275X X5 6" Professional Jointer A 5 year warranty, one of 4 free tools or a $50 rebate, up to $500 in accessories, & over $2000 in savings with X-treme savings book. Quality glue ups time after time. Delta's 6" professional jointer makes it easy with a 1HP motor, rack and pinion fence system, three knife cutterhead and easy to position infeed table. Delta X5 Model 37-275X 6" Professional Jointer includes a 1 HP, 120/240V, induction motor; enclosed stand, dust collector connector, center-mounted fence, 3-knife cutterhead, cutterhead guard, push blocks and instruction manual. * 5 YEAR WARRANTY. All X5 series tools are backed by a "best
in class" 5 year warranty. That is 3-4 years longer than other
brands. SPECIFICATIONS * Motor: 1 HP, 120/240V, 60Hz., single phase, 1725 rpm Features: * 1 HP, 120/240-volt induction motor Delta 37-380 8" Professional Jointer Delta's 37-380 jointer features large, cast iron, 72-inch infeed and outfeed tables that support extra long stock at widths as great as 8 inches. Infeed and outfeed tables travel on gibbed dovetail ways--which means longer life and continuous accuracy. Heavy-duty, center-mounted, cast iron fence tilts 45 degrees in and out for beveling or chamfering operations. Rack and pinion adjustment system allows the fence to adjust with precision. The 1-1/2-horsepower induction motor turns the cutterhead at 5,600 rpm to deliver 16,800 cuts per minute for smooth, powerful cutting. Two-year warranty on machine, parts, and accessories. Includes jointer, motor, enclosed stand, dust collector connector, center-mounted fence, three-knife cutterhead, cutterhead guard, push blocks, and instruction manual. DELTA DIFFERENCE * Enclosed a steel cabinet houses a powerful 1 1/2HP motor and
includes an integral dust connector with 4" diameter outlet
for easy dust collection hook-up. SPECIFICATIONS: MOTOR: 1 1/2 HP WARRANTY Delta 37-350A DJ-20 8" Precision Jointer When you're ready to step up to the professional woodworking scene, this jointer from Delta helps design your calling card. Materials up to 8 inches wide glide across the cast-iron infeed and outfeed tables. The fence adjusts with rack-and-pinion precision, beveling 45 degrees in and out with positive stops at 90 and 45 degrees to give you the angle your work demands. We appreciate the easy height-adjustment lever that keeps the guide close to the three-blade drum--no matter what the position--through its 1/2-inch range via a parallelogram support structure. Delta realizes the use of heavy machinery carries a great risk of injury; consequently, they designed this jointer with a large, easily accessible on/off paddle switch at shoulder height on the right side. Driven by a 1-1/2-horsepower induction motor for use with a built-in dust collector port, this jointer will complement any woodshop. Features: * 1-1/2-horsepower, single-phase motor delivers 16,500 cuts per minute for
a smooth finish Delta 37-365X X5 8" DJ20 Precision Jointer The DJ20 Precision Jointer is packed full of features that give you optimal precision in flattening and squaring material for your projects. Powered by a 1-1/2 HP motor, the DJ20 features three knives that cut at 16,500 cuts per minute (5500 rpm) for an ultra-smooth finish. A modular cutterhead means consistently clean cuts. A cabinet stand completely encases the motor and pulleys to protect them from sawdust and shavings. An extra-long infeed table provides a full 42" of work support for larger pieces. A unique diamond ribbing design ensures superior weight distribution. A Jackscrew arrangement means easy replacement and adjustment of individual knives. This jointer’s large (4"x12") rabbeting ledge securely supports work pieces right at the cutterhead. Your purchase includes a 5-year warranty. FEATURES * 3-knife cutterhead module SPECIFICATIONS * Motor (Enclosed Stand) 1 1/2 HP, 120/240V, 60Hz., single phase TEFC, 3450
rpm Delta 37-361 12" Jointer Get wide surfacing capacity
with the DJ-30 12-inch Jointer. Powered by a three-horsepower,
single phase induction motor, this jointer easily joints stock
up to 12 inches
wide and can remove a maximum of 3/4-inch material in one
pass at narrower widths. The massive cast iron bed gives the unit stability
and is ribbed to maintain trueness. A built-in rabbeting ledge
allows cutting 3/4-inch deep rabbets. At the critical
area where the table meets the cutterhead, there are replaceable, serrated lips
to reduce noise. Also, the infeed table moves on a parallelogram support system,
which allows the table edge to follow the same arc as the cutterhead, so there
is less of a gap for safer and more efficient cutting. A convenient lever control
is used for adjusting the infeed table quickly and easily. The
center mounted, cast iron fence tilts in and out to 45
degrees with positive Features: * 3 hp, 230V, single phase induction motor for powerful cutting
action |
| Site Map | ©2003,
2004 AllWoodWork.com all rights reserved. contact
us , privacy policy. Established Feb.
14, 2003
|