Here are some Jet jointers for sale. They are listed in order of price, lowest to highest. The sizes are a 6" and an 8" jointers. Be sure your shop has the proper electric wiring to accommodate the power supply needs of the jointer you choose. And remember you will always wish you had bought a bigger size jointer after you get using the one you bought.

JET 708457K / JJ-CSX 6" Woodworking Jointer

When it comes to jointers, there aren't a lot of differences among the leaders in the market. Like other manufacturers, Jet uses heavy-duty cast iron in the fence, jointer base, and infeed/outfeed tables and offers a three-blade drum and built-in 4-inch dust port. Their design, however, features a couple of innovations that changed our "jointers are jointers" mindset. While the infeed tables in other models can only be raised or lowered with a rod or lever system, this machine's design allows you to adjust both of the feed tables by rotating smooth, industrial-style hand wheels. This feature lends itself to easier tapers and gives you more control when you need to take off precise measurements, like 1/64 of an inch, a setting that can frustrate woodworkers lifting the arms up or down on other machines. The fence glides extremely smoothly throughout its range of motion and tilts both ways, but, where other brands offer fixed stops only at 45 and 90 degrees, Jet's jointer adjusts to quickly reproduce multiple cuts at any angle you find necessary. Driven by a 4,850 rpm, 1hp induction motor completely encased in a welded steel stand, this jointer comes prewired for 115-volt outlets and can be converted to run off 230-volt sources. As a final touch, Jet designed the industrial start switch with holes behind the button for locking with a readily available Master Lock to keep coworkers or family members safe from accidental injury.

Features:

* 1 hp, single-phase, 115/230-volt motor
* 46-inch cast-iron bed with precision-machined finish ensures accuracy
* Fence tilt two ways and features 90- and 45-degree positive stops
* Easy-to-use handwheels accurately adjust the infeed and outfeed tables
* Built-in ledge for cutting rabbets

List Price: $679.00 Price: $549.99 and FREE Shipping from Amazon.

JET JJ-8CS / 708458K 8" Woodworking Jointer

Extra-long cast-iron bed (9 inches wide by 66-1/2 inches long) features a precision-machined finish to ensure accuracy. Large, easy-to-use handwheels make infeed and outfeed table height fully adjustable. Large center-mounted cast-iron fence is equipped with 900 and 450 positive stops. Heavy three-knife cutterhead powered by a 2 hp, 1-phase, 230-volt motor rapidly cuts to produce superior finish. Easy-to-read infeed depth scale and dovetailed table ways allow adjustment for continued accurac. Rabbeting ledge is built into the table for versatility. Magnetic controls, tilting fence, front and rear safety knife guards, three high-speed steel knives, one-piece welded stand, and built-in dust chute.

Features:

* Extra long (9 w by 66-1/2-inch L) cast iron bed
* Three-knife cutter head
* 2hp, 1ph, 230-volt motor
* Easy-to-read infeed depth scale
* Front and rear safety knife guide