Below are Grizzly tablesaws for sale. A tablesaw is usually the cornerstone of a shop, so choose a good one to build your shop around. Plan ahead! If you plan on only dabbling with small crafts and knickknacks then you should be fine with a smaller and cheaper model, but serious woodworking and furniture building will be much more fun (and easier) if you have a nice big 3-5hp 10"-12" cabinet model tablesaw.

Go To Grizzly 12"-14" and Industrial Models

Note: Prices may change over time, be sure to check the price in the shopping cart before you finalize the purchase. The price I am displaying is current on December 8, 2004 and the price may change at anytime. These tablesaws will have freight charges for shipping. So check for shipping fees before you finalize your order.

Grizzly G0444 10" Tablesaw

Product Description- We have re-vamped our new contractor-style saw by taking 20 years of customer comments and in-use experience and applying them to this new saw. We feel that there is no contractor-style saw on the market (at any price) that can compare in quality to this. Additional features include: T-slotted table; Powder coated paint for durability; large dust hood underneath with a 4" connector port; side braces are punched to accept hooks to hang blades, wrenches, inserts, etc.; heavy-duty double-braced stand for rigidity; heavy-duty cast-iron handwheels with chrome handles; fence mounted switch for easy access; regular as well as dado blade inserts; beveled table edge; precision machined cast iron motor pulley for reduced vibration; Aluma-classic fence lifts off instantly; produced in an ISO 9001 rated factory; approximate shipping weight of 276 lbs.

Features:

* 1 1/2HP, 110V/220V, pre-wired 110V, with cast iron table and powder coated sheet metal wings
* 57" rails are standard (30" ripping capacity)
* Extension rails available to rip 50" wide
* Patented heavy-duty cast iron miter gauge with adjustable bar
* Rock solid Shop Fox aluma-classic fence with easy adjustment feature

Price: $435.00

Grizzly G0444Z 10" Tablesaw

Product Description- We have re-vamped our new contractor-style saw by taking 20 years of customer comments and in-use experience and applying them to this new saw. We feel that there is no contractor-style saw on the market (at any price) that can compare in quality to this. Additional features include: T-slotted table; Powder coated paint for durability; large dust hood underneath with a 4" connector port; side braces are punched to accept hooks to hang blades, wrenches, inserts, etc.; heavy-duty double-braced stand for rigidity; heavy-duty cast-iron handwheels with chrome handles; fence mounted switch for easy access; regular as well as dado blade inserts; beveled table edge; precision machined cast iron motor pulley for reduced vibration; Aluma-classic fence lifts off instantly; produced in an ISO 9001 rated factory; approximate shipping weight of 298 lbs.

Features:

* 2HP, 110V/220V pre-wired 220V, with precision ground cast iron table and wings
* 57" rails are standard (30" ripping capacity)
* Extension rails available to rip 50" wide
* Patented heavy-duty cast iron miter gauge with adjustable bar
* Rock solid Shop Fox aluma-classic fence with easy adjustment feature

Price: $525.00

Grizzly G1023S 10" Tilting Arbor Super Heavy-Duty Table Saw - 3 H.P.

(Reviewer) - I have owned my 1023S for about two years and couldn't be more satisfied. I have been into woodworking, renovation and home repair for about 35 years and had started upgrading my older tools for a more serious retirement shop a few years ago.

I started my research pretty well predisposed to the Unisaw or Jet. However a friend of ours had recently purchased a long bed Grizzly jointer and I was very impressed with it's quality and performance. We took a trip to the Springfield Grizzly store and received a first-rate demonstration of the 1023S from one of their sales/training representative. The most impressive part of the demo was he did it on a two year old machine in their display & training backshops. The slightly worn, dirty and dinged machine ran smoothly and quietly as a new one. A month or so later I ordered the machine via Grizzly's web site and the saw arrived, on dock in Wichita, in 36 hours!

This machine is heavy and you will need help to unload and assemble it. If you buy the mobile base, as I did, don't assemble the wings and fence until you have the saw body on the base. We assembled the mobile base, tied it to the shipping pallet and gently rocked the saw onto the base. Fairly easy task for my wife and myself.

Setup took about 3-4 hours with a lot of this time just spent exploring and "ooohhhing". I have seen several comments regarding difficulty with removing the protective coating from the top and extensions. I happened to have a bottle of citrus based bike chain cleaner and it worked well. The cleaner and a handful of paper towels had most of the goo off in 10-15 minutes (after a 10 minute soak). Grizzly's claim of mirror-like surface finish is a slight exaggeration, but I would put it somewhere between the Jet and the Powermatic 66 - it is a very nice finish. The top assembled easily with minor tape shimming on one side and was completely flat. I dug out the dial indicators to true the blade with miter slots and decided to leave it alone - It was so close I was probably going to make it worse, before better. Blade height and tilt cranks are smooth and effortless, a real treat after using my old Craftsman for nearly 3 decades. I purchased 25' of heavy duty power cord which was easily installed using their handbook. Overall, the handbook is good, however it illustrates a much more substantial blade guard than I received. I purchased the optional motor cover and strongly recommend doing so. While I do not have an active dust control system, the cabinet probably keeps 90+ of the dust within it.

I cut a fair amount of 8/4 hardwood and it offers no challenge to the 3HP motor. I have been tempted on several occasions to tweak the blade-groove adjustment but have never found it necessary. The miter gage, while fairly stout, does require fairly frequent adjustment. The ShopFox Classic fence is great! It looks a lot like the Beismeier and is solid as a rock. It too has never required adjustment since I set up the saw. It has a very usable measurement site gage on the rail.

If I have any complaint at all it is the quality of the blade guard/splitter. It does the job but is not up to some of their illustrations. It installs and removes with two bolts and while not difficult it doesn't encourage you to reinstall it. With this aside, I would recommend the 1023 to anyone.

Features:

* 3 H.P. single-phase, 220V motor
* 5/8" diameter arbor is long enough to accept dado blades up to 13/16"
* Cutting capacity: 8" left and 25" right of blade
* Magnetic safety switch is standard and protects the motor and operator
* One-piece steel cabinet-type stand

List Price: $895.00 Price: $825.00

Grizzly G1023S110 10" Tilting Arbor Super Heavy-Duty Table Saw - 2 H.P. 110V

Features:

* 2 H.P. single-phase, 110V, TEFC motor
* Cutting capacity: 8" left and 25" right of blade
* One-piece steel cabinet-type stand
* Table has T-slots so your miter gauge will not fall off the table when retracted
* Table size (with 2 solid extension wings attached): 36-1/4" x 27-1/8"

Price: $825.00

Grizzly G1023SL 10" Left-Tilting Super Heavy-Duty Table Saw

(Reviewer) - I've owned the Grizzly G1023SL for a year now. I could't be happier with it. It arrived in great time & shape. Set-up took about half a day (the bulk of the time setting it up is getting the shipping preservative off). The table was milled flat as were the cast iron wings. Squaring up the blade with the table and fence was simple. I bought the mobile base with it as I only have a single car garage for a shop. You will need some help lifting the cabinet onto the mobile base.

I don't have any experience with the Jet & DeWalt supersaws that are in the same price range but I can't imagine that they can compare. 3 hp with about 500lbs or cabinet saw is a lot more than they offer. This saw runs smooth, cuts anything you feed to it & is as accurate as possible. And with the mobile base it's as easy or easier to move around as a contractors model.

If you can afford $900, look at this saw. It will beat the supersaws and I suspect is an even match for the Delta, Jet & other 3hp cabinet saws at a lot lower price.

Features:

* 3 H.P. single-phase, 220V motor
* 4" dust port included
* Cutting capacity: 8" left and 26" right of blade
* One-piece steel cabinet-type stand
* Triple V-belt drive

Price: $895.00

Grizzly G1023Z 10" Tilting Arbor Deluxe Heavy-Duty Table Saw - 3 H.P. Motor - Z Series

Product Description
We have redefined what a cabinet-type shop saw should be like. This is a top of the line piece of equipment. Our model G1023Z preserves the Grizzly tradition of quality and value, but with some exciting new extras - all standard! One of the great features include the best after-market fence available. The Shop Fox Fence is the most accurate fence you can find, with unprecedented repeatability. The Shop Fox Fence secures simultaneously at both ends to lock in place for absolute rigidity and accuracy.

Features:

* Includes 2 table inserts (1 for the blade and 1 for the dado set) and heavy-duty cast iron miter gauge
* Powerful 3 H.P. single phase 220V motor with triple belt drive
* Precision Shop Fox® Fence
* Table size (with 2 solid extension wings attached) is 36-3/4" x 27"

List Price: $1,095.00 Price: $925.00

Grizzly G1023ZX 10" Tilting Arbor Deluxe Heavy-Duty Table Saw - 5 H.P. Motor - Z Series

Product Description
We have redefined what a cabinet-type shop saw should be like. This is a top of the line piece of equipment. Our model G1023ZX preserves the Grizzly tradition of quality and value, but with some exciting new extras - all standard! One of the great features include the best after-market fence available. The Shop Fox Fence is the most accurate fence you can find, with unprecedented repeatability. The Shop Fox Fence secures simultaneously at both ends to lock in place for absolute rigidity and accuracy.

Features:

* Includes 2 table inserts (1 for the blade and 1 for the dado set) and heavy-duty cast iron miter gauge
* Powerful 5 H.P. single phase 220V motor with triple belt drive
* Rail-mounted magnetic safety switch is standard and protects the motor as well as the operator
* Rip capacity: 25"

List Price: $1,195.00 Price: $1,050.00

Grizzly G1023ZX3 10" Tilting Arbor Deluxe Heavy-Duty Table Saw - 5 H.P. Motor 3 Phase- Z Series

Product Description
We have redefined what a cabinet-type shop saw should be like. This is a top of the line piece of equipment. Our model G1023ZX3 preserves the Grizzly tradition of quality and value, but with some exciting new extras - all standard! One of the great features include the best after-market fence available. The Shop Fox Fence is the most accurate fence you can find, with unprecedented repeatability. The Shop Fox Fence secures simultaneously at both ends to lock in place for absolute rigidity and accuracy.

Features:

* 5/8" diameter arbor is long enough to accept dado blades up to 13/16"
* Includes 2 table inserts (1 for the blade and 1 for the dado set) and heavy-duty cast iron miter gauge
* Powerful 5 H.P. three phase 220V motor with triple belt drive
* Rail-mounted magnetic safety switch is standard and protects the motor as well as the operator
* Table size (with 2 solid extension wings attached) is 36-3/4" x 27"

Price: $1,095.00

Go To Grizzly 12"-14" and Industrial Models