Below are Grizzly tablesaws for sale. A tablesaw is usually the cornerstone of a shop, so choose a good one to build your shop around. Plan ahead! If you plan on only dabbling with small crafts and knickknacks then you should be fine with a smaller and cheaper model, but serious woodworking and furniture building will be much more fun (and easier) if you have a nice big 3-5hp 10"-12" cabinet model tablesaw. Industrail model machines are also listed below.

Go To Grizzly 10"Model Tablesaws

Note: Prices may change over time, be sure to check the price in the shopping cart before you finalize the purchase. The price I am displaying is current on December 8, 2004 and the price may change at anytime. These tablesaws will have freight charges for shipping. So check for shipping fees before you finalize your order.

Grizzly G5959 12" Professional Cabinet Saw - 5 H.P.

(Reviewer)- Having used a 3HP and 5 HP Delta Unisaw, I have to say that there is no notable difference between the Delta and Grizzly other than the price, you definitely get more for your money with Grizzly.

When I unpacked the wooden crate, my particular saw had some shipping damage even though the crate was in tact. The rear cast iron trunnion bracket was cracked in two pieces. It was disappointing to see since I wanted to use the saw the weekend I picked it up and could not. I contacted Grizzly and they had the parts I needed shipped out the next day. They are very good with the customer service and the expenses were covered in full. Bottom line is, shipping damage could happen to any saw, there are no guarantees.

After I replaced the damaged part and cleaned off the cosmoline, the saw was very easy to set up and align. The large cast iron table top with extension wings is large enough that I have yet to require a particle board extension table between the fence rails.

With the 5 HP motor a top of the line 12" blade, wood does not have a chance, the saw does not slow down. Overall, the saw has delivered everything that I expected.

Get a mobile base unless you plan on never moving the saw because it is heavy. You do not need more than a 8" Dado blade or else you will need to make a new throat plate (bigger blade will hit the iron plate if you raise the blade up to full height), I can't imagine any project requiring a dado deeper than and 1".

The fence is a Biesemeyer knock-off and not the rail is not as beefy as the Biesemeyer but it does work fine. It is very easy to adjust for parallel and square.

Features:

* 5 H.P., 220V, single phase motor
* Dual arbors: 5/8" and 1"
* Maximum rip capacity: 50"
* Precision ground cast iron table
* Shipping weight approx.: 615 lbs.

List Price: $1,595.00 Price: $1,495.00

Grizzly G9957 12" Professional Cabinet Saw - 7-1/2 H.P.

Product Description- This industrial-grade saw can handle the extra big jobs, all day, every day. And don't worry if you're stepping up to this beast from a 10" saw; it includes quick-change 5/8" and 1" arbors, so you can keep your old blades. The G5959 has all the features you'd expect from a top-quality cabinet saw, plus some you'll pay extra for elsewhere. But don't take our word for it - check it out yourself!

Features:

* 7-1/2 H.P., three phase motor
* Cast iron miter gauge
* Overall dimensions: 81-1/2"W x 38-1/2"D x 39-1/2"H
* Precision ground cast iron table
* Shipping weight approx.: 615 lbs.

Price: $1,595.00

Grizzly G7209 14" Professional Cabinet Saw, 5 HP, 1 Phase

Product Description
Our 14" Cabinet Saw has quickly become the workhorse of the professional shops. With features such as quadruple V-belt drive, machined collars, outboard arbor support bearing, dust pick up and a huge 48-1/2" x 38" table surface, no job is too large. From 4' x 8' sheet stock to material 5" thick, this saw will handle it and ask for more. If you're tired of trying to process large stock on a small table saw, look no further. Chances are you'll be able to afford one too, since other saws with these features cost considerably more. Put a 1HP power feeder on this saw and you'll be able to rip all day.

Features:

* 1" arbor
* 5 HP, 220V, Single Phase motor
* Maximum rip to right of blade: 50-3/4"
* Precision ground cast iron table
* Table size with wings: 48-1/2" D x 38" W

List Price: $2495.00 Price: $2,295.00

Grizzly G7210 14" Professional Cabinet Saw, 7-1/2 HP, 3 Phase

Product Description - Our 14" Cabinet Saw has quickly become the workhorse of the professional shops. With features such as quadruple V-belt drive, machined collars, outboard arbor support bearing, dust pick up and a huge 48-1/2" x 38" table surface, no job is too large. From 4' x 8' sheet stock to material 5" thick, this saw will handle it and ask for more. If you're tired of trying to process large stock on a small table saw, look no further. Chances are you'll be able to afford one too, since other saws with these features cost considerably more. Put a 1 HP power feeder on this saw and you'll be able to rip all day.

Features:

* 1" arbor
* 7.5 HP, 220V, 3 Phase Motor
* Maximum depth of cut 5"
* Precision ground cast iron table
* Table size with wings: 48-1/2" D x 38" W

Price: $2,495.00

Grizzly G0502 18" Cut-Off Saw (Also Known as a "Jump Saw")

Product Description - Perfect for manufacturers and processes that require fast cut-off sawing of all sizes of material up to 12" wide, the G0502 performs one task very well - it crosscuts just about anything, and it can do it all day long without batting an eye! A foot activated pneumatic controlled cutting action, dual 78" extension rollers, and numerous safety advantages combine to make this one of the easiest and safest industrial cut-off machines on the market. Once you use it, you will see why this cut-off specialist has made believers out of hundreds of professional manufacturing facilities.

Features:

* 10 HP TEFC induction motor
* 78" infeed and outfeed roller extension
* Maximum cutting capacity: 2"H x 12"W, 3"H x 11"W and 4"H x 10"W
* Saw blade size: 18"
* Shipping Weight Approx: 1188 lbs.

Price: $2,650.00

Grizzly G0549 24" Jump Saw

Product Description - Perfect for manufacturers and processes that require speed when cutting material up to 21" wide. This Cut-Off Saw performs one task very well - it crosscuts large dimension lumber, and can do it all day long without batting an eye! This saw features a foot activated pnewmatically controlled cutting action, dual 78" extension rollers, and numerous safety advantages. All combine to make this the easiest and safest industrial cut-off machine on the market. One you use one, you will see why this cut-off specialist has made believers out of hundreds of professional manufacturing facilities. Other features include: 220V magnetic switch with thermal overload protection: maximum cutting cycle speed of 45 SPM; 24" x 80T included blade; infeed and outfeed roller extensions; automatic safety guard; swing stop and heavy-duty stop; foot switch; emergency button for cutting release; easily adjustable clamp; convenient cycle speed adjustment; approximate shipping weight of 1410 lbs. 440V operation requires purchasing additional compenents.

Features:

* Maximum cutting capacity: 2"H X 21"W, 4"H x 19"W, 6"H X 15"W and 8"H X 8"W
* Maximum cutting length: 78"
* Motor: 15 HP, 220V/440V, 3-phase, 38/19 Amps, 60 hz, 1725 RPM, TEFC induction
* Saw blade size: 20", 22", 24" diameter X 1" arbor
* Table size of 28-1/2" wide by 45" deep with a height of 32-1/4"

Price: $4,750.00

Grizzly G0524 Straight Line Rip Saw

Product Description
If ripping is a regular cutting operation in your shop, then Grizzly has the saw for you! Designed for the professional shop, the Grizzly G0524 Straight Rip Saw features a variable feed speed of 52-92 FPM, a 51" x 37" precision ground cast iron table, a 4 " depth of cut capacity, a smooth action conveyor feed system, and an extra-long table extension and rip fence for long boards. Power is supplied by a 15 HP main motor and a 1 HP feed motor. Feature for feature and dollar for dollar, there is no better saw on the market!

Features:

* Feed motor: 1 HP
* Main motor: 15 HP, Three-phase
* Max. saw blade diameter: 12"
* Maximum cutting thickness: 4"
* Minimum cutting length: 8" (with optional kit)

Price: $7,450.00

Grizzly G0501 Sliding Table Saw

Product Description
If you are regularly cutting full size panels, our new sliding table saw is the answer you've been looking for! This saw features a 10 HP motor for the 14" main blade, a 1 HP motor for the 4-3/4" scoring blade, digital blade controls and a 51 3/16" maximum you are regularly cutting full size panels, our new sliding table saw is the answer you've been looking for! This saw features a 10 HP motor for the 14" main blade, a 1 HP motor for the 4-3/4" scoring blade, digital blade controls and a 51 3/16" maximum you are regularly cutting full size panels, our new sliding table saw is the answer you've been looking for! This saw features a 10 te miter gauge. We have made every effort to engineer this saw to rival machines that cost three times as much, and once you get your hands on it, you'll understand what we mean. .

Features:

* Cutting Length: 110-1/4"
* Cutting Width: 51-3/16"
* Digital control panel for blade speed, height adjustments, blade tilt and calibration
* Main Blade Size: 14"
* Main Motor: 10 HP, 3-Phase, 220V

Price: $7,750.00

Go To Grizzly 10" Model Tablesaws